Age & Use Verification

FRO Peptides sells research compounds strictly for laboratory and research use only. Products are not for human consumption. You must be 21 years of age or older to enter this site.

BPC-157 is a synthetic 15-amino-acid peptide based on a sequence from a protein found in gastric juice. It is one of the most widely studied research peptides, used mainly in rodent models of soft-tissue and gastrointestinal injury. This page covers its structure, the acetate vs. arginate salt question, what a BPC-157 certificate of analysis should show, and how to handle the lyophilized powder, using FRO Peptides’ two published lot reports as examples.

BPC-157 at a glance

Full name Body Protection Compound-157 (pentadecapeptide BPC 157)
Sequence Gly-Glu-Pro-Pro-Pro-Gly-Lys-Pro-Ala-Asp-Asp-Ala-Gly-Leu-Val (GEPPPGKPADDAGLV), 15 amino acids
Molecular formula C62H98N16O22
Molecular weight ≈ 1,419.5 g/mol
CAS number 137525-51-0
Supplied as Lyophilized white powder in sealed vials
FRO vial sizes 5mg, 10mg
FRO tested purity 98.59% (5mg, HG8J-P5ZK) and 98.2% (10mg, N7Y9-66RZ), HPLC

Where BPC-157 comes from

BPC-157 was developed by a research group at the University of Zagreb, Croatia, from a larger protein they isolated from human gastric juice and named “body protection compound.” The 15-residue fragment is the part they found to be stable and active in their models, and it is made synthetically. Unlike many research peptides, it is reported to be stable in gastric acid, which is part of why it is studied in gastrointestinal models.

The sequence is unusual: four prolines in the first eight residues. Proline-rich stretches resist enzymatic cleavage and make the chain fairly rigid, which helps explain its stability in lab conditions.

Why labs study it

Worth knowing: most of the published BPC-157 literature comes from the original Zagreb group, and it is overwhelmingly animal and cell work. Independent replication is still limited, so treat it as a research compound under active study.

BPC-157 acetate vs. arginate

Peptides are made as salts, and the salt form is set by the last purification step. Most BPC-157 on the research market is the acetate salt, the standard form for lyophilized peptides. Some suppliers sell an arginate salt (BPC-157 Arg), marketed as more stable in solution. The peptide chain is the same in both, but the salt changes the weight of each vial that is actual peptide, so the two are not directly interchangeable by milligram. FRO’s COAs confirm identity, purity and measured quantity, and don’t state a salt form. If your protocol depends on it, ask before ordering.

How to read a BPC-157 certificate of analysis

A COA is only useful if you know what each line proves. FRO has two BPC-157 reports on file from AccuMark Labs, both received 02/24/2026 and published 09/07/2026:

Test 5mg (HG8J-P5ZK) 10mg (N7Y9-66RZ) What it tells you
Identity BPC-157, conforms BPC-157, conforms The main compound in the vial matches BPC-157.
HPLC purity 98.59% 98.2% Share of the sample that is the target peptide, measured by UV at 220 nm, against a spec of more than 98.0%. Both chromatograms show one main peak at about 3.4 minutes. The dip near 1 minute is the solvent front.
Quantity 6.05 mg in a 5 mg vial 11.13 mg in a 10 mg vial How much peptide is actually in the vial. Both lots were overfilled, by about 21% and 11%. Many COAs skip this line, but it is the one that catches underfilled vials.

Both lots clear the purity spec. Both full reports, chromatograms included, are free to open in the BPC-157 COA library. Match the code on your vial to the right report.

What these reports don’t cover

These reports cover identity, HPLC purity and measured quantity. They don’t include endotoxin, sterility, mass spectrometry or salt form. Mass spectrometry would confirm the exact molecular weight of 1,419.5. FRO has BPC-157 testing underway at Vanguard Laboratory, an ISO 17025 lab, and the results will be added to the COA library when they come in.

Red flags on any supplier’s BPC-157 COA

Storage and handling for research use

Frequently asked questions

Does FRO Peptides publish a COA for BPC-157?

Yes, one for each vial size. Both reports from AccuMark Labs, an independent lab, are in the COA library, chromatograms included.

What purity is FRO’s BPC-157?

The 5mg lot tested at 98.59% and the 10mg lot at 98.2% by HPLC, both against a specification of more than 98.0%.

Is FRO’s BPC-157 acetate or arginate?

The current COAs don’t state a salt form. Contact FRO before ordering if your protocol needs a specific salt.

Can I get BPC-157 combined with TB-500?

Yes. The Wolverine Stack combines BPC-157 and TB-500 in one vial, the Glow blend adds GHK-Cu, and KLOW adds GHK-Cu and KPV. Each has its own lot report. See the TB-500 research guide for that compound.

Is BPC-157 from FRO for human use?

No. FRO sells BPC-157 strictly for laboratory and analytical research. It is not for human or veterinary use.

View BPC-157 research peptide (5mg, 10mg) →
Lot reports for both sizes published in the COA library. Ships next business day, FedEx 2-Day.

For laboratory research use only. Not for human or veterinary use. Not a drug, food, or cosmetic under FDA regulations. Nothing on this page is medical advice.

Leave a Reply

Your email address will not be published. Required fields are marked *